SUPERTECH is a specially formulated emulsion paint for interior walls. It is easy to apply and provides attractive matt finishing on walls, asbestos, gypsum boards and bricks.




Product Usage

SUPERTECH is suitable for new or previously painted masonry surfaces such as brickwork, plaster, cement, rendering and asbestos.

Application Details

Application methods: Brush, roller or air spray
Mixing Ratio (by volume): The paint is ready for use after thorough stirring For sealing new or bare surface thin up to 5% with clean water
Thinner / Cleaner: Clean Water
Dry to Touch: 15 – 30 min., depending on ambient temperature
Dry to Overcoat: 1–2hours
Spreading Rate: 8 – 10 m2 / Litre
Wet Film Thickness: 85μ
Dry Film Thickness: 30μ

Surface Preparation

New and Bare Surfaces
New plastered surfaces must be allowed to dry thoroughly at least 28 days or less than 12% moisture content as measured with a moisture meter. All surfaces to be painted must be sound, dry, clean and free from oil, grease, dirt, mildew, releasing agent, curing compounds and other foreign bodies.

Previously Painted Surfaces
All loose or defective paint or powdery residues shall be thoroughly rubbed down by using suitable abrasive paper and dusted off or high pressure water jet, if applicable. Make good any surface imperfection with suitable putty or filler. Ensure surface is dry, clean, and free from dirt, grease or wax prior to application of paint.