SUPERSHIELD MAJESTIC GOLD is an ultra-premium, 100% pure acrylic water-based paint formulated to provide the ultimate protection for exterior wall surfaces. It is combined with the best available special gold pigment to give superb radiant shine of gold effects. It’s angular shine helps make surfaces smooth and washable. This is an exclusive paint due to the unique water-based acrylic technology invented by co-research between TOA and Dow, USA. It also has excellent alkali resistance, superb adhesion, excellent dirt pick-up resistance and has special self-cleansing properties. SuperShield Majestic Gold is the ultimate exterior paint that is able to act as a substitute for gold foil covered areas such as temple murals, pagodas and shrines.
SUPERSHIELD MAJESTIC GOLD is specially formulated for exterior plastered walls and masonry. It is suitable for plaster, concrete, cement, masonry, gypsum and tiles. It is able to act as a substitute for gold foil covered areas such as temple murals, pagodas and shrines.
Application methods: Brush, roller or air spray
Mixing Ratio (by volume): The paint is ready for use after thorough stirring For sealing new or bare surface thin up to 10% with clean water
Thinner / Cleaner: Clean Water
Dry to Touch: 20 – 30 min., depending on ambient temperature
Dry to Overcoat: 2 hours (maximum indefinite)
Spreading Rate: 9 – 10 m2 / Litre
Wet Film Thickness: 90μ
Dry Film Thickness: 33μ
New and Bare Surfaces
New plastered surfaces must be allowed to dry thoroughly at least 28 days or less than 12% moisture content as measured with a moisture meter. All surfaces to be painted must be sound, dry, clean and free from oil, grease, dirt, mildew, releasing agent, curing compounds and other foreign bodies.
Previously Painted Surfaces
All loose or defective paint or powdery residues shall be removed by brushing and scrapping using a stiff fiber brush or high pressure water jet. Any area affected by mould, algae, lichen, moss and fungus shall be treated with TOA Micro Kill. Make good any surface imperfection with suitable weather resistant putty or sealant. Ensure surface is dry, clean, and free from dirt, grease or wax prior to application of paint. Porous surface with high absorption should first prime with Wallsila 900 sealer.
