NANOSHIELD is a high quality exterior paint produced by 100% acrylic polymer resin and special pigments. It is specially formulated with Hybrid Technology from Germany. The Hybrid Technology contains Nano Silicone and Fluorocarbon that provides excellent dirt and stain resistance. NanoShield does not only offers protection against severe climate it also offers excellent protection against mould and fungus on walls. It is also low odour and low VOC making it environmentally friendly.
NANOSHIELD is specially formulated for exterior plastered wall and masonry. It is suitable for new or previously painted masonry surfaces such as brickwork, plaster, cement, rendering and asbestos. It is highly recommended for long lasting protection of building and housing.
Application methods: Brush, roller or air spray
Mixing Ratio (by volume): The paint is ready for use after thorough stirring For sealing new or bare surface thin up to 10% with clean water
Thinner / Cleaner: Clean Water
Dry to Touch: 20 – 30 min., depending on ambient temperature
Dry to Overcoat: 2 hours (maximum indefinite)
Spreading Rate: 9– 10 m2 / Litre
Wet Film Thickness: 100 – 112μ
Dry Film Thickness: 30 – 40μ
New and Bare Surfaces
New plastered surfaces must be allowed to dry thoroughly at least 28 days or less than 12% moisture content as measured with a moisture meter. All surfaces to be painted must be sound, dry, clean and free from oil, grease, dirt, mildew, releasing agent, curing compounds and other foreign bodies.
Previously Painted Surfaces
All loose or defective paint or powdery residues shall be removed by brushing and scrapping using a stiff fiber brush or high pressure water jet. Any area affected by mould, algae, lichen, moss and fungus shall be treated with TOA Micro Kill. Make good any surface imperfection with suitable weather resistant putty or sealant. Ensure surface is dry, clean, and free from dirt, grease or wax prior to application of paint. Porous surface with high absorption should first prime with Wallsila 900 sealer.
